Afore HNS6000TL Installation And Operation Manual

26 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Installation and Operation Manual

On-Grid PV Inverter

Version: S06018-02

Building 7, No.333 Wanfang Rd, Minhang District, Shanghai, China. 201112

Other manuals for Afore HNS6000TL

User Manual33 pages

Questions and Answers:

J
Jordan RichardsAug 9, 2025
What to do if my Afore Inverter shows 'No Utility'?
- M
  Michael ArellanoAug 9, 2025
  If your Afore Inverter displays a 'No Utility' message, it could be due to several reasons: * A utility outage: The inverter should automatically restart once the grid is back to normal. * A tripped AC circuit breaker: Replace the AC circuit breaker. * A poor AC connection: Check the AC connector for a secure connection. * Inverter fault: If the problem persists after several restarts, the inverter may need to be replaced.
J
Jeffery CannonAug 14, 2025
Why is my Afore Inverter showing a 'Bus High Fault' or 'Bus Fault'?
- E
  Erin LopezAug 14, 2025
  A 'Bus High Fault' or 'Bus Fault' on your Afore Inverter can be caused by: * High PV Input voltage: Ensure the PV input voltage is within the specified range (450Vdc for up to 3.0kW models, 500Vdc for up to 5.0kW models). * Poor AC side connection: Check the AC connector and circuit breaker for a secure connection.
W
Wyatt OrtizAug 21, 2025
What to do if Afore Inverter displays 'Over Temperature Fault'?
- D
  Dalton WrightAug 21, 2025
  If your Afore Inverter is showing an 'Over Temperature Fault', it could be due to: * The inverter enclosure being too hot: Turn off the inverter and allow it to cool down to a normal temperature. Consider relocating the inverter to a well-ventilated area. * A faulty temperature sensor: Replace the temperature sensor.
D
Daniel BryantAug 27, 2025
How to solve 'Ground Current Fault' on Afore Inverter?
- A
  alexandra30Aug 27, 2025
  A 'Ground Current Fault' on your Afore Inverter may be due to: 1. Poor earthing or high leakage current: Check the AC output wiring and restart the inverter. 2. PV(+) or PV(-) earthed: Inspect the PV array wiring.
S
Sara MurphySep 1, 2025
Why does my Afore Inverter show 'PV Over Fault'?
- A
  Amy LeeSep 1, 2025
  An Afore Inverter displaying a 'PV Over Fault' typically indicates that the PV array's Voc (open-circuit voltage) is too high. To resolve this: * Redesign the PV array configuration. * Measure the PV array voltage to ensure it matches the inverter's display.

Afore HNS6000TL Specifications

General

Model	HNS6000TL
Type	Grid-tied Inverter
Rated Output Power	6000 W
Max. DC Power	6600 W
Start Voltage	200 V
Number of MPPT	2
Nominal AC Voltage	230V
Max. Output Current	27.3 A
Power Factor	>0.99
THDi	<3%
AC Grid Frequency	50/60Hz
Max. Efficiency	98.1%
Euro Efficiency	97.5%
DC Switch	Yes
Protection Degree	IP65
Operating Temperature Range	-25°C to +60°C
Cooling	Natural Convection
AC Voltage Range	180~280V
Communication	RS485, WiFi, Ethernet
Humidity	0% - 100% (non-condensing)

Related product manuals

Afore HNS4000TL

Afore HNS8000TL

Preview: Afore HNS7000TL

Afore HNS7000TL

Afore HNS3000TL-1

Afore HNS2000TL-1

Afore HNS3600TL-1

Afore HNS2500TL-1

Afore HNS1000TL-1

Preview: Afore Residential HNS Series

Afore Residential HNS Series

Preview: Afore BNT003KTL

Afore BNT003KTL

Preview: Afore BNT050KTL

Afore BNT050KTL

Preview: Afore AF1K-SL-1

Afore AF1K-SL-1