Afore HNS8000TL Installation And Operation Manual

29 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Installation and Operation Manual

On-Grid PV Inverter

Version: 03.610100007100

Building 7, No.333 Wanfang Rd, Minhang District, Shanghai, China. 201112

Other manuals for Afore HNS8000TL

User Manual33 pages

Questions and Answers:

M
Mark FrancisAug 7, 2025
What to do if my Afore HNS8000TL Inverter shows 'No Utility'?
- L
  Lisa RoweAug 7, 2025
  If your Afore Inverter displays a 'No Utility' error, it could be due to several reasons: a utility loss, the AC side circuit breaker being turned off, a poor connection on the AC side, or an inverter fault. First, if the grid returns to normal, the inverter will restart automatically. Then, replace the AC circuit breaker. Also, check the AC connector for a secure connection. If the fault persists after several restarts, the inverter may need to be replaced.
R
ryanchaseAug 13, 2025
How to fix Bus High Fault/Bus Fault on Afore HNS8000TL Inverter?
- C
  cooperdanielAug 13, 2025
  A 'Bus High Fault' or 'Bus Fault' on your Afore Inverter can be caused by high PV input voltage or a poor connection on the AC side. To resolve this: * Check that the PV input voltage is within the acceptable range (450Vdc for models up to 3.0kW, or 500Vdc for models up to 5.0kW). * Ensure the AC connector and circuit breaker are well connected.
S
Scott JenkinsAug 17, 2025
What to do if Afore HNS8000TL shows Over Temperature Fault?
- J
  Jessica AcevedoAug 17, 2025
  If your Afore Inverter is showing an 'Over Temperature Fault', it could be because the inverter enclosure is too hot or there's a fault with the temperature sensor. To address this, turn off the inverter and allow it to cool down to a normal temperature. Consider installing the inverter in a well-ventilated location. If the problem continues, the temperature sensor may need to be replaced.
A
Andrea GarciaAug 23, 2025
Why does my Afore HNS8000TL have a Ground Current Fault?
- M
  mcmillanmonicaAug 23, 2025
  A 'Ground Current Fault' on your Afore Inverter can be due to poor earthing leading to high leakage current, or the PV(+) or PV(-) being earthed. You should check the AC output wiring and restart the inverter. Also, check the PV array wiring.
J
josespearsAug 27, 2025
How to resolve PV Over Fault on Afore Inverter?
- D
  Diamond BennettAug 27, 2025
  A 'PV Over Fault' on your Afore Inverter typically means the PV array's Voc (open-circuit voltage) is too high. To fix this, re-design the PV array configuration. Also, measure the PV array voltage and ensure it matches what the inverter displays.
A
Austin MooreSep 1, 2025
How to fix GFCI Fault on Afore HNS8000TL?
- K
  Kenneth PerezSep 2, 2025
  To address a GFCI Fault on your Afore Inverter, restart the inverter.

Afore HNS8000TL Specifications

General

Model	HNS8000TL
Rated Output Power	8000W
Max. DC Voltage	1000V
Max PV Input Voltage	1000V
Number of MPPT	2
Max Input Current per MPPT	13A
AC Output Frequency	50Hz / 60Hz
THDI	<3%
AC Grid Frequency	50Hz / 60Hz
Protection Degree	IP65
Nominal AC Voltage	230V
AC Voltage Range	180V-280V
AC Output Voltage	230V
Power Factor	>0.99
Operating Temperature Range	-25°C to 60°C

Related product manuals

Afore HNS4000TL

Afore HNS6000TL

Preview: Afore HNS7000TL

Afore HNS7000TL

Afore HNS3000TL-1

Afore HNS2000TL-1

Afore HNS3600TL-1

Afore HNS2500TL-1

Afore HNS1000TL-1

Preview: Afore Residential HNS Series

Afore Residential HNS Series

Afore AF3.6K-SL

Afore AF2.5K-SL-1