12
Mounting
EN
DTA 10
5 Mounting
5.1 Mounting the product
Mount the control unit to the wall. Use the enclosed dowels, depending on the
type of wall.
Verify that the control unit is mounted to an even, rigid and dry wall at eye
level.
Verify that the control unit is accessible and easy to oversee at all times.
Verify that the control unit is protected against water and splash water.
Verify that the control unit is not mounted in a humid room.
Verify that the permissible ambient temperature is not exceeded.
1. Mount the upper screw to the wall.
2. Fit the control unit.
3. Align the control unit.
4. Fasten the control unit by screw-
ing the bottom lug to the wall.
To Next Page
Loading...
