13
Mounting
EN
DTA 10
5.2 Electrical connection
5.2.1 Inserting/connecting the battery
The 9 V monobloc battery is not factory-installed in the control unit. The
monobloc battery is contained in the bag of accessories.
NOTICE
INCORRECT HANDLING
The product may only be opened at the side at the battery compartment.
• Only open the product to insert or replace the 9 V monobloc battery.
Failure to follow these instructions can result in equipment damage.
1. Open the cover of the battery
compartment using a slotted
screwdriver.
To Next Page
Loading...
