What to do if my AG Neovo HMQ-4301 displays no picture?
If your AG Neovo Monitor isn't displaying a picture, ensure that the power cord is properly plugged in and the power switch is turned on. Also, verify that a signal connection is correctly connected to the display.
Why AG Neovo Monitor has no picture?
The monitor might not display a picture for several reasons: the power cord could be disconnected, the main power switch on the back of the display might not be switched on, the selected input may have no connection, or the display might be in standby mode. To resolve this, ensure the power cord is plugged in, the power switch is on, and a signal connection is established with the display.
What to do if AG Neovo HMQ-4301 Monitor has picture but no sound?
If you can see a picture but cannot hear any sound, there might be a few reasons: * The source signal cable may not be properly connected. * The volume might be turned all the way down. * The MUTE function could be turned on. * There might be no external speakers connected. To fix this, make sure that both video and sound inputs are correctly connected, increase the volume, switch the MUTE function off, and connect external speakers, adjusting the volume to a suitable level.
What to do if AG Neovo HMQ-4301 picture is distorted?
If the picture is distorted with abnormal patterns, it could be due to the signal cable not being connected properly, or the input signal exceeding the display's capabilities. Ensure the signal cable is firmly attached. Also, check the video signal source to verify it is within the display's supported range; refer to the display's specification section for details.
Why is colour abnormal on AG Neovo HMQ-4301 Monitor?
Abnormal colour display is often caused by a signal cable that is not properly connected. To fix this, make sure that the signal cable is firmly attached to the back of the AG Neovo Monitor.
What to do if AG Neovo HMQ-4301 can hear sound, but no picture?
If you can hear sound but there is no picture, the source signal cable might not be connected correctly. To solve this, check that both video and sound inputs are properly connected to your AG Neovo Monitor.
How to adjust AG Neovo HMQ-4301 image to fill the screen?
If the display image doesn’t fill up the full size of the screen, the picture format is not set correctly. To fix this, press the 16:9 button and select a suitable picture format.
Why AG Neovo HMQ-4301 shows interference?
Interference displayed on the display or audible noise is often caused by surrounding electrical appliances or fluorescent lights. To reduce interference, move the AG Neovo Monitor to another location.
Why after-images appear on AG Neovo Monitor?
After-images can appear on the display after it is powered off if a still picture is displayed for an extended period. To prevent this, avoid displaying still images for prolonged periods, as this can cause a permanent after-image to remain on the display.
What to do if some pixels do not light up on AG Neovo Monitor?
This display is manufactured using an extremely high level of precision technology: however, sometimes some pixels of the display may not display. This is not a malfunction.
To Next Page
General
