11
PRODUCT DESCRIPTION
1.2.2 Adjusting the Tilt
For comfort viewing, tilt the LCD monitor up to an angle of -5° to 20°. Hold the stand with one hand and use
the other to adjust the LCD monitor to the desired angle.
SC-2202 SC-2402/SC-2702
1.2.3 Wall Mounting
To wall mount the LCD monitor, do the following steps:
1. Remove the base stand.
Refer to page 39.
2. Wall mount the LCD monitor.
Screw the mounting bracket to the VESA holes at the rear of the LCD monitor.
Note: Take measures to prevent the LCD monitor from falling down and lessen possible injury and damage
to the monitor in case of earthquakes or other disasters.
• Use only the 100 x 100 mm wall mount kit recommended by AG Neovo. All
AG Neovo wall mount kits comply with VESA standard.
• Secure the LCD monitor on a solid wall strong enough to bear its weight.
• It is suggested to wall mount the LCD monitor without tilting it facing
downward.
SC-2202 SC-2402/SC-2702
To Next Page
Loading...
Need help?
General
