37
4450A EN 20060221 Basic operation (‘Operator mode’)
CR 85-X DIGITIZER
you have entered an identified cassette not having the status ‘erased’. You now have
the choice: either cancel erasing or erase the image plate.
• To cancel erasing and make a regular scan: press the Escape key.
• To erase the image plate: press the Confirm key.
While erasing, the CR 85-X will display:
When the CR 85-X has erased the image plate, it displays the operator main
screen.
5 Remove the cassette(s) from the output buffer.
READY
ERASURE
WARNING
The next cassette(s) will be erased
Enter number of cassettes to erase: #
Put cassette(s) in input buffer or
press to quit.
To Next Page
Loading...
