AGFA SnapScan - User Manual

SnapScan
Owner’s Guide
Preface
This chapter gives you information about SnapScan
™
and about the organization of this
Owner's Guide.
Chapter 1 — Preparing the scanner
“Preparing the scanner” shows you how to prepare your SnapScan for installation.
Chapter 2 — Installing the scanner
This chapter shows you how to set up your SnapScan for the Apple
®
Macintosh
®
and for
PC
™
.
Chapter 3 — Using the scanner
“Using the scanner” shows you how to place your originals.
Appendix A — Using the transparency option
This appendix instructs you on how to connect the transparency option you may have
purchased.
Appendix B — Using the document feeder option
Here you find instructions on how to connect the document feeder option you may have
purchased.
Appendix C — Troubleshooting
“Troubleshooting” can be helpful when you come across problems that you are unable to
solve.
Appendix D — Technical information
This appendix provides specifications for your SnapScan.
Appendix E — Regulation compliance
It gives you information about safety regulations and electromagnetic interference.
abc
The complete picture.

Summary

Chapter 1 - Preparing the scanner

Unpacking and Initial Setup

Performing a Power-On Test

Steps to perform a self-test to ensure the scanner is operating correctly.

Chapter 2 - Installing the scanner

Hardware Requirements

Lists the minimum hardware specifications for the computer system.

Installing on Apple Macintosh

Step-by-step guide for connecting and configuring the scanner with a Macintosh.

Installing on PC

Step-by-step guide for connecting and configuring the scanner with a PC.

Appendix C - Troubleshooting

Common Scanner Operational Issues

Covers common problems like calibration errors, lamp issues, and unusual noises.

Software and Connection Problems

AGFA SnapScan Specifications

General

Brand	AGFA
Model	SnapScan
Category	Scanner
Language	English