iii
Contents
Introduction ix
About your StudioScan II xi
About this Owner’s Guide xi
About the FotoLook documentation xii
Conventions xii
1 Preparing the scanner 1
Unpacking the scanner 3
Unlocking the scanner 5
Locking the scanner 5
Taking a closer look 6
Installing the Transparency Module 7
Unpacking the Transparency Module 7
Connecting the Transparency Module 9
Testing the scanner 10
2 Installing the scanner 11
Important safety instructions 13
About SCSI devices 14
Changing the SCSI ID number 14
Installation for the Macintosh 15
Choosing a SCSI ID number 15
Connecting the scanner 16
Testing the connection 17
Installation for the PC 18
Which SCSI adapter card 18
Connecting the scanner 18
3 Using the scanner 21
Placing a reflective original 23
Placing a transparent original 23
Contents
To Next Page
Loading...
