AgfaPhoto DV-5000G - Date Printing (Picture Record Mode Only); Night Mode (Picture Record Mode Only)

ʳ
31
Date Printing (Picture Record Mode Only)
To enable Date Printing:
1. When in Camera Mode, use Up/Down Buttons (Tele-Wide Buttons) (
) to select Date
Printing, then press OK Button to switch to Date Printing submenu.
2. Use Up/Down Buttons to choose On or Off.
3. Press OK Button to validate the setting and exit.
Display Screen Date Printing Option
Note
Date would be shown on the printed picture
once date printing is enabled.
Night Mode
Use Night Mode for night scenes or low light conditions. A longer exposure captures more
detail of background subjects.
Display Screen Night Mode Option
Note
To avoid blurry pictures, place the camera on a flat,
steady surface, or use a tripod.
OK Button
OK Button