Agilent Technologies 3200 Series - Page 11

Issued: 01-05-2012 Revision: 1.0 Copyright  2012 Agilent Technologies
Page 11 of 13
5.5 IQ - Documentation Inspection
Document
Provided Number
Accept Number
Vendor’s Manual
Manufacturer’s Specification
Certificate
Conclusion
Checked by
Date
Verified by
Date
5.6 Buffers Used in the Qualification
The standard buffers were purchased from _________.
Lot No.
pH value
Expiration Date
Remark
Performed by
Date
Verified by
Date
5.7 OQ – Meter Self-Test
Self Test ___________Passed ______________Failed
Observations: ______________________________________________________________
5.8 OQ – Manual Temperature Verification
Temperature: _______________ ________Passed ________Failed
Specification: 25.0 ± 0.1 °C
Observations: ______________________________________________________________
5.9 OQ – pH Electrode Calibration
pH Electrode Calibration ____________Passed ____________Failed
pH Electrode Information (Model/Lot/Serial Number) ________________________________
Lot No.
pH Buffer Value
Expiration Date
Calibration Result
Slope (in percent)