Agilent Technologies 3200 Series - Page 12

Issued: 01-05-2012 Revision: 1.0 Copyright  2012 Agilent Technologies
Page 12 of 13
E0
Calibration Specification
Performed by
Date
Verified by
Date
5.10 OQ – ISE Electrode Calibration
ISE Electrode Calibration ____________Passed ____________Failed
ISE Electrode Information (Model/Lot/Serial Number) ________________________________
Lot No.
pH Buffer Value
Expiration Date
Calibration Result
Slope (in percent)
E0
Calibration Specification
Performed by
Date
Verified by
Date
5.11 OQ – DO Probe Calibration
DO Probe Calibration ____________Passed ____________Failed
DO Probe Information (Model/Lot/Serial Number) ________________________________
Calibration Result
Zero Oxygen Calibration
Full Scale Calibration
Calibration Specification
Performed by
Date
Verified by
Date
5.12 OQ – Conductivity Probe Calibration
Conductivity Probe Calibration ____________Passed ____________Failed
Conductivity Probe Information (Model/Lot/Serial Number): _________________________
Lot No.
Conductivity
Standard Value
Expiration Date
Calibration Result
Cell Constant