Agilent Technologies 3200 Series - Page 4

Issued: 01-05-2012 Revision: 1.0 Copyright  2012 Agilent Technologies
Page 4 of 13
 pH electrode or pH combination electrode or pH triode combination electrode, with
BNC connector
 pH buffers
Option
Agilent Standard Solution
Part Number
Package
Shelf Life
1
pH4.001 buffer (NIST)
5190-0535
3 x 250ml
15 months
pH7.00 buffer (NIST)
5190-0537
3 x 250ml
15 months
pH10.01 buffer (NIST)
5190-0536
3 x 250ml
15 months
2
pH4.00 buffer (GB)
5190-0538
3 x 250ml
15 months
pH6.86 buffer (GB)
5190-0539
3 x 250ml
15 months
pH9.18 buffer (GB)
5190-0540
3 x 250ml
15 months
3
pH buffer package (4.01、7.00、
10.01) (NIST)
5190-0533
3 x 250mL
15 months
4
pH buffer package (4.00、6.86、
9.18) (GB)
5190-0533
3 x 250mL
15 months
Select one option from the list. Each option contains three standard buffers.
For 3200I/3200M with ISE function:
 Ion selective electrode (ISE) with BNC connector
 Certified ISE standards appropriate for ion selective electrode, for example, NaF for
fluorion measurement with I9111 Fluoride combination ISE. Agilent don’t supply ISE
standards.
For 3200C with conductivity function:
 Conductivity probe with 3 pin mini DIN connector
 Certified conductivity standards appropriate for conductivity probe. Agilent don’t
supply conductivity standards.
For 3200D with DO function:
 Dissolved Oxygen probe with 4 pin miniDIN connector
 Zero Oxygen solution for Zero Oxygen Calibration, freshly prepared by customers.