A front-panel menu tutorial
This section is a step-by-step tutorial which shows you how to use the
front-panel menu. We recommend that you spend a few minutes with this
tutorial to get comfortable with the structure and operation of the menu
before attempting verification, calibration, or adjustments.
The menu is organized in a top-down tree structure with three levels
(menus, commands, and parameters). You move down
¿
or up
¾
the menu tree to get from one level to the next. Each of the three levels
has several horizontal choices which you can view by moving left
<
or right
> .
Menus
Commands
Parameters
The menu is organized in a top-down tree structure with three levels.
To turn on the menu, press Shift Menu On/Off .
To turn off the menu, press Shift Menu On/Off .
To execute a menu command, press Enter .
To recall the last menu command that was executed,
press
Shift Recall Menu .
To turn off the menu at any time without saving changes,
press
Shift Cancel .
3
Chapter 3 Front-Panel Menu Operation
A front-panel menu tutorial
39
To Next Page
Loading...
Need help?
General
