Agilent Technologies 4395A - Rear Panel Features and Connectors

Rear
P
anel
Features
and Connectors
Rear P
anel F
eatures and
Connectors
Figure
4-3
shows
the
features and
connectors on
the rear
panel. Requirements
for the
input
signals
to
the
rear
panel connectors
are provided
in Chapter
11.
Figure 4-3.
Rear
panel
1.
External
Reference
Input
Connector
Connects
an
external
frequency
reference signal
to the
analyzer that
is
used
to
phase
lock
the
analyzer
for
increased
accuracy
in frequency
.
When the
4395A is
equipped with
the external
oven
(Option
1D5),
this
connector
must
be
connected
to
REF
O
VEN
connector (14).
The
external
frequency
reference
function
is
automatically enabled when a signal is connected to this input. When the
signal is removed,
the analyzer automatically switches back to its internal frequency reference
.
2. Internal Reference Output Connector
Connects to the frequency reference input of an external instrument to phase lock it to the
4395A for stable synchronization with the internal frequency of the 4395A.
Front and Rear Panels 4-11