6-4
Utilities
To configure Quick Help languages
Loading an updated language file from floppy disk
When updates occur, an updated language file can be downloaded from:
www.agilent.com/find/5462xsw
for the 54620-series or
www.agilent.com/find/5464xsw
for the 54640-series,
or call an Agilent center and request a language disk for your instrument.
1 Insert the floppy disk containing the language file into the floppy disk
drive on the oscilloscope.
2Press the
Utility key, then press the Language softkey to display the
Language menu.
3Press the
Load Languages softkey to load the updated language file into
the oscilloscope.
The message
Loading Language file. Please Wait.
will be displayed as the new language file is being loaded into the oscilloscope.
4Press the Language softkey and select the language to be viewed.
Language Info softkey
•Press the Language Info softkey to show the Quick Help system version
and what languages are loaded into the oscilloscope.
The oscilloscope is shipped from the factory with English, French, German,
Italian, Japanese, Korean, Portuguese (Brazilian), Russian, Spanish, Simplified
Chinese, and Traditional Chinese languages loaded.
To Next Page
Loading...
Need help?
General
