3-3
Testing Performance
List of Test Equipment
List of Test Equipment
Below is a list of test and equipment and accessories required to perform
the performance test verification procedures.
Equipment Critical Specifications Recommended Model/
Part Number
Test connector, 8-by-2 Not required if 01660-63801 Test Fixture is available
See “To construct the test connector”
later in this chapter
n/a
Test fixture For testing digital channel threshold accuracy Agilent 01660-63801
Digital Multimeter 0.1 mV resolution, 0.005% accuracy Agilent 34401A
Power Splitter Outputs differ by 0.15 dB Agilent 11667B
Power Supply DC offset voltage of -5.5 V to 35.5 V, 0.1 mV resolution Agilent 3245A
Oscilloscope Calibrator 25 MHz—100 MHz sine wave, 5 ppm Fluke 5820A
BNC banana cable Agilent 11001-60001
BNC cable (qty 3) Agilent 10503A
Probe cable Agilent 01650-61607
Shorting Cap BNC Agilent 1250-0774
Adapter BNC(f) to banana(m) Agilent 1251-2277
Feedthrough 50
Ω, BNC (m) and (f) Agilent 11048C
Adapter BNC Tee (m) (f) (f) Agilent 1250-0781
Blocking capacitor Agilent 10240-60001
Adapter (qty 3) N(m) to BNC(f) Agilent 1250-0780
service.book Page 3 Wednesday, December 18, 2002 8:35 AM
To Next Page
Loading...
Need help?
General
