Agilent Technologies 655 A Series - Principles of Operation; Introduction; IO Interface Signals

Principles of Operation 81
4
Principles of Operation
Introduction
This section describes the different functional circuits used in the power supply models covered in this manual. The topics
are presented in the following order: First, the I/O external signals that connect to the Agilent power supply are described.
Next, the overall block diagram for the power supply is described, and last, each functional block shown in the overall block
diagram is discussed in detail.
I/O INTERFACE SIGNALS
Figure 4-1 shows the interface signals between the power supply and the end user (or other external circuits and devices).
Table 4-1 describes these interface signals.
Figure 4-1. Agilent Power Supply, I/O Interface Diagram