Agilent Technologies 66319B

USER’S GUIDE
Agilent Technologies
Model 66319B/D, 66321B/D
Mobile Communications DC Source
Featuring programmable output resistance
(Refer to page 18 for a brief description of the model differences.)
Agilent Part No. 5964-8184
Microfiche No. 5964-8185
Printed in Malaysia: February, 2005

Agilent Technologies 66319B Specifications

General

Brand	Agilent Technologies
Model	66319B
Category	Power Supply
Language	English

Summary

Safety Summary

SAFETY SYMBOLS

QUICK REFERENCE

The Front Panel - At a Glance

Provides an overview of the front panel controls, display, and annunciators.

The Rear Panel - At a Glance

Identifies the connectors and ports located on the rear panel of the instrument.

Front Panel Annunciators

SCPI Programming Commands - At a Glance

A summary of SCPI commands for programming the DC Source.

GENERAL INFORMATION

Output 1 Characteristic

INSTALLATION

Installation and Operation Checklist

A checklist to guide the user through the installation and initial operation setup.

Output Connections

Instructions for connecting the output terminals to loads and test fixtures.

Remote Sense Connections

TURN-ON CHECKOUT

Checkout Procedure

Step-by-step procedure to verify the DC Source's operation after power-on.

FRONT PANEL OPERATION

Front Panel Description

Detailed overview of the DC Source's front panel controls and their functions.

System Keys

Function Keys

Examples of Front Panel Programming

INTRODUCTION TO PROGRAMMING

Introduction to SCPI

PROGRAMMING THE DC SOURCE

Programming the Output

Instructions for setting output parameters like voltage, current, and resistance.

Making Basic Measurements

Triggered Measurements

LANGUAGE DICTIONARY

Calibration Commands

SPECIFICATIONS

Specifications

Lists the performance specifications for the DC Source models.

PERFORMANCE, CALIBRATION, AND CONFIGURATION

Equipment Required

Constant Voltage (CV) Tests

Constant Current (CC) Tests

Performing the Calibration Procedure

Step-by-step instructions for calibrating the DC Source via front panel or SCPI.

Error Messages

Error Number List

Lists and explains error numbers and messages for the DC Source.

Example Programs

Pulse Measurements