What to do if Agilent Technologies 66332A Power Supply fails the turn-on self test?
If the Agilent Technologies Power Supply fails the turn-on self test, perform the verification procedures in Chapter 2 from the front panel to determine if any functions are not calibrated or are not operating properly.
General| Output Voltage | 0 to 20 V |
|---|---|
| Output Current | 0 to 5 A |
| Power Rating | 100 W |
| Number of Outputs | 1 |
| Interface | GPIB |
| Operating Temperature Range | 0°C to 55°C |
| Line Regulation Voltage | 0.01% + 2 mV |
| Voltage Readback Accuracy | 0.05% + 5 mV |
| Storage Temperature Range | -40°C to 70°C |
| Programming Accuracy Current | ±(0.1% + 5 mA) |
| Current Programming Accuracy | ±(0.1% + 5 mA) |
Details warranty periods, repair/replacement options, and customer responsibilities.
General safety precautions for servicing and operation to prevent injury.
Importance of connecting the protective earth terminal to ground for safety.
Warning about internal components and need for qualified service personnel.
Safety advice about having assistance during servicing.
Important safety warnings and precautions for instrument operation.
Procedures for verifying compliance with specifications.
Verifies accuracy of voltage programming and display.
Verifies accuracy of current programming and display.
Tests DC regulation of output current under load and line variations.
Detailed diagnostic steps for common issues.
To Next Page
