What to do if Agilent Technologies 6633B fails the turn-on self test?
If the Agilent Technologies Power Supply fails the turn-on self test, perform the verification procedures in Chapter 2 from the front panel to determine if any functions are not calibrated or are not operating properly.
General| Output Voltage | 0 to 20 V |
|---|---|
| Output Current | 0 to 3 A |
| Power Rating | 60 W |
| Number of Outputs | 1 |
| Storage Temperature Range | -40 to 70 °C |
| Input Frequency | 47 to 63 Hz |
| Transient Response (50% to 100% load change) | 50 µs |
| Operating Temperature Range | 0 to 55 °C |
| Voltage Readback Accuracy | 0.05% + 5 mV |
Agilent Technologies certifies product specifications and calibration traceability.
Details hardware and software warranty terms, repair/replace options, and exclusions.
Excludes defects from improper maintenance, misuse, or unauthorized modification.
States customer's sole remedies and limits Agilent's liability for damages.
Information on obtaining support programs and further assistance.
General safety precautions for operating the Class 1 instrument.
Specifies operating environment: indoor, pollution degree 2, humidity, altitude.
Pre-power checks: line voltage, fuse, and safety precautions.
Ensures proper grounding to minimize shock hazard.
Guidance on using correct fuses to prevent hazards.
Warning against operation in flammable gas environments.
Caution against unauthorized internal access.
Details of Agilent Technologies, Inc. and its manufacturing sites.
Product safety standards conformance and conformity statement.
Declaration regarding sound pressure levels according to German directive.
Information on manual revisions and updates.
Identifies and describes the main components of the front panel.
Explains methods for entering numeric values via the front panel.
Explains front panel indicators and keys for immediate functions.
Overview of front panel menu structure and commands.
Summary of SCPI commands for remote control.
Identifies and describes the rear panel connectors and switches.
Describes manual structure and guides users to find information.
Details safety requirements for a Class 1 instrument.
Lists available options and accessories for the de source.
Provides an overview of the instrument's integrated functions.
Lists key features like programming resolution and measurement capabilities.
Explains front panel controls, display, and annunciators.
Details remote control via GPIB or RS-232 using SCPI/Compatibility.
Describes the source's output behavior in CV and CC modes.
Instructions for initial inspection, saving packaging, and listing included items.
Guidance on cleaning the external case parts safely.
Recommendations for instrument placement and rack mounting.
Details on connecting power, output terminals, and load wiring.
Considerations for minimizing voltage drops and connecting multiple loads.
Instructions for using external sense terminals for load voltage compensation.
Discusses stability issues with remote sensing and OVP circuit behavior.
Explains fast/normal modes and effects of capacitive/inductive loads.
Details on connecting inhibit/fault signals and digital I/O ports.
Information on connecting the instrument to a controller via GPIB or RS-232.
Overview of checkout purpose and basic front panel keypad operations.
Step-by-step guide to verify instrument operation.
Information on error messages, selftests, and line fuse issues.
Introduces front panel operation and describes its components.
Explains the function of the SYSTEM keys.
Details Function, Immediate Action, and Scrolling Keys.
Describes how to use metering keys for measurements.
Explains keys for controlling output voltage, current, and protection.
Details the use of numeric and navigation keys for input.
Introduction to front panel programming examples.
Overview of verification/calibration and required equipment.
Diagram and description of the test setup for verification.
Guidance on performing operational verification tests.
Tests for verifying voltage and current programming and measurement accuracy.
Instructions for performing instrument calibration.
Details on accessing and using the front panel calibration menu.
Step-by-step guide for various calibration procedures.
Covers changing calibration password and GPIB calibration.
List of error numbers and their descriptions.
Details SCPI syntax, interface, and command errors.
Describes errors related to command execution and parameter values.
Information on system-level errors.
Details errors related to instrument queries.
Lists errors detected during the instrument's self-test.
Lists errors specific to the instrument's hardware and software.
Steps to open the unit and reconfigure the power transformer wiring.
Guidance on installing the correct fuse and closing the unit.
To Next Page
