What to do if Agilent Technologies 6631B fails the turn-on self test?
If the Agilent Technologies Power Supply fails the turn-on self test, perform the verification procedures in Chapter 2 from the front panel to determine if any functions are not calibrated or are not operating properly.
General| Output Current | 0 to 5 A |
|---|---|
| Number of Outputs | 1 |
| Type | DC Power Supply |
| Programming Accuracy Voltage | 0.05% + 5 mV |
| Programming Accuracy Current | 5 mA |
| Readback Accuracy Voltage | 0.05% + 5 mV |
| Readback Accuracy Current | 5 mA |
| Ripple & Noise (20 Hz to 20 MHz) | 3 mVrms |
| Interface | GPIB |
| Load Regulation | 0.01% + 2 mV |
| Line Regulation | 0.01% + 2 mV |
| Operating Temperature Range | 0°C |
| Storage Temperature Range | -40°C |
To Next Page