Agilent Technologies 6631B

D - Line Voltage Conversion
70
Install the Correct Line Fuse
♦ Unscrew the line fuse cap from the rear panel and install the correct fuse.
For 100/120 Vac operation: F4A; part number 2110-0055
For 220/230 Vac operation: F2A; part number 2110-0002
♦ Mark the voltage setting that the unit has been set to on the rear panel label.
Close the Unit
♦ Replace the outer cover.
♦ Reconnect the power cord and turn on the unit.
List of Fuses
F500 2110-0055 1 Fuse, F4A, 250V (for 100/120 Vac input)
F500 2110-0002 1 Fuse, F2A, 250V (for 220/230 Vac input)
F300 2110-0712 1 Fuse, sub-min, M4A, 125V
F301 2110-0712 1 Fuse, sub-min, M4A, 125V
F302 2110-0697 1 Fuse, sub-min, M15A, 32V (66332A, 6632B, 6633B)
F302 2110-0685 1 Fuse, sub-min, M7A, 125V (6634B)
F303 2110-0697 1 Fuse, sub-min, M15A, 32V (66332A, 6632B, 6633B)
F303 2110-0685 1 Fuse, sub-min, M7A, 125V (6634B)
F304 2110-0699 1 Fuse, sub-min, M5A, 125V
F305 2110-0777 1 Fuse, M8A, 32V (66332A, 6632B, 6633B)
F305 0811-3776 1 Res Fusible 0.5 Ohm 5W (6634B)
F310 2110-0025 1 Fuse, M15A, 32V (6631B)