B - Performance, Calibration, and Configuration
152
Performance Test Record Form
Model Agilent 66321B/D
Model Agilent 66319B/D Output 1
Report No ______________
Date __________________
Test Description Minimum
Specification
Results Maximum
Specification
CONSTANT VOLTAGE TESTS
Voltage Programming and Readback
Low Voltage (@ 0 V) Vout
Front Panel Display Readback
High Voltage (@ Full Scale) Vout
Front Panel Display Readback
− 10 mV
Vout − 5 mV
14.9825 V
Vout − 9.5mV
_________
_________
_________
_________
+ 10 mV
Vout + 5 mV
15.0175 V
Vout + 9.5 mV
CV Load Effect
− 5.0mV
_________ + 5.0mV
CV Source Effect
− 0.5mV
_________ + 0.5 mV
PARD (Ripple and Noise)
peak-to-peak
RMS
N.A.
N.A.
_________
_________
+ 6 mV
+ 1 mV
Transient Response
Voltage in 20 µs
− 20 mV
_________
+ 20 mV
CONSTANT CURRENT TESTS
Current Programming and Readback
Low current (@ 0 A) Iout
Front Panel Display Readback
High Current (@ Full Scale) Iout
Front Panel Display Readback
− 2.3 mA
Iout − 0.5mA
2.99717 A
Iout − 6.5mA
_________
_________
_________
_________
+ 2.3 mA
Iout + 0.5mA
3.00283 A
Iout + 6.5mA
1A Range Current Readback
Front Panel Display Readback @ 0 A
Front Panel Display Readback @ 1 A
Iout − 0.2 mA
Iout − 1.2mA
_________
_________
Iout + 0.2 mA
Iout + 1.2mA
20 mA Range Current Readback
Front Panel Display Readback @ 0 A
Front Panel Display Readback @ + 20 mA
Iout − 2.5 µA
Iout − 22.5 µA
_________
_________
Iout + 2.5 µA
Iout + 22.5 µA
Current Sink
Front Panel Display Readback @ − 20 mA
Front Panel Display Readback @ − 3 A
Isink − 22.5 µA
Isink − 5.1 mA
_________
_________
Isink + 22.5 µA
Isink + 5.1 mA
CC Load Effect
− 0.75mA
_________ + 0.75mA
CC Source Effect
− 0.75mA
_________
+ 0.75mA
PARD (Current Ripple and Noise)
RMS
N.A.
_________
+ 2.0 mA
RESISTANCE TESTS
Low Resistance Readback (0 ohm)
High Resistance Readback (1 ohm)
−2 mΩ
0.993 Ω
_________
_________
+2 mΩ
1.007 Ω
To Next Page
Loading...
Need help?
General
