33
Programming Reference
Default Values, Standard Settings
[:SOURce]:VOLTage[1]
:LEVel]
[IMMediate]
[:AMPLitude] 1.0V
:OFFSet 0.0V
:HIGH 500mV
:LOW –500mV
:LIMIt[:High] +500V
:LOW –500V
:STATe OFF
:STATus: :OPERation not applicable
:PRESet not applicable
:QUEStionable[:EVENt]? not applicable
:CONDition? not applicable
:ENABle not applicable
:NTRansition not applicable
:PTRansition not applicable
:SYSTem :CHECk [:ALL][:STATe] ON
:ERRor? not applicable
:KEY +255
:PRESet not applicable
:SECurity[:STATe] OFF
:SET not applicable
:VERSion "1992.0
:WARNing[:COUNt]? not applicable
:STRing? not applicable
:BUFFer? not applicable
:TRIGger :COUNt 1
:IMPedance 50
Ω
Parameter *RST, Default Values
To Next Page
Loading...
