2
2
3
4
4
4
4
4
5
6
6
7
7
7
8
9
10
10
11
12
Table of Contents
Transmission/Reflection Network Analyzers
S-parameter Network Analyzers
Network Analyzer Options
Measurement Accessories
Calibration kits
Waveguide measurements
Verification kits
Cables and adapter sets
For devices with 3.5 mm or SMA connectors
For devices with 7 mm connectors
For devices with Type-N connectors
For devices with 2.4 mm connectors
For devices with K connectors (2.92 mm)
For devices with 7-16 connectors
For devices with waveguide
Test Configuration Accessories
Peripheral Accessories
Literature and Manuals
Upgrades
Application and Product Notes
Agilent 8720E Family
Network Analyzers
Configuration Guide
8719ET, 50 MHz to 13.5 GHz
8720ET, 50 MHz to 20 GHz
8722ET, 50 MHz to 40 GHz
8719ES, 50 MHz to 13.5 GHz
8720ES, 50 MHz to 20 GHz
8722ES, 50 MHz to 40 GHz
The Agilent Technologies 8720E family of microwave
network analyzers integrates a microwave source,
tuned-receiver, and transmission/reflection or
S-parameter test set into a single, cost-effective
instrument. To complete a microwave measurement
system, select the desired network analyzer options,
test port cables, and calibration kits. Also, addi-
tional measurement accessories may be selected.
Discontinued Product Information
— For Support Reference Only —
Information herein, may refer to products/services no longer supported.
We regret any inconvenience caused by obsolete information. For the
latest information on Agilent’s test and measurement products go to:
www.agilent.com/find/products
In the US, call Agilent Technologies at 1-800-829-4444
(any weekday between 8am–5pm in any U.S. time zone)
World-wide Agilent sales office contact information is available at:
www.agilent.com/find/contactus
To Next Page
Need help?
General
