1-8 Chapter1
Alphabetical Command Reference
ANAI
ANAI
Syntax
ANAI<num>; or ANAI?;
ANAI; or ANAI?;
Description
Front Panel Equivalents
Command Description Range Query Response
ANAI
1
1. When the analog bus is enabled (ANABON), this command requires that the complementary information (<num>)
be sent.
Measures and displays the data at the
auxiliary input (ANALOG IN).
integers 1–31
<0|1><
L
F
>
ANAI
2
2. When the analog bus is disabled (ANABOFF), this command does not require the <num> parameter.
Measures and displays the data at the
auxiliary input (ANALOG IN).
N/A
<0|1><
L
F
>
Command Hardkey Softkey
ANAI
Meas
To Next Page
Loading...
Need help?
General
