Agilent Technologies 8720ES Programmer's Guide

Chapter 1 1-253
Alphabetical Command Reference
STORSEQ
STORSEQ
Syntax
STORSEQ<num>;
Description
Front Panel Equivalents
STPSIZE
Syntax
STPSIZE<num>[HZ|DB]; or STPSIZE?;
Description
Front Panel Equivalents
Command Description Range Query Response
STORSEQ Stores the instrument state of the
indicated sequence to disk. Used with the
INTD and EXTD commands to designatethe
internal or external disk. Requires pass
control mode when using the GPIB port.
integers 1 to 6 N/A
Command Hardkey Softkey
STORSEQ
Command Description Range Query Response
STPSIZE Sets the step size while editing a list
frequency segment.
stimulus range
1
1. For frequency or power sweeps, refer to “Preset State and Memory Allocation,” in your analyzer’s reference
guide. For CW time: 0 to 24 hours. For frequency sweep, transform on: ±1/frequency step. For CW time sweep,
transform on: ±1/time step.
<num><
L
F
>
Command Hardkey Softkey
STPSIZE
Seq
STORE SEQ
Sweep Setup
STEP SIZE

Agilent Technologies 8720ES Specifications

General

Brand	Agilent Technologies
Model	8720ES
Category	Measuring Instruments
Language	English