Agilent Technologies 8753ES Installation And Quick Start Guide

1-18 Chapter1
Installing Your Analyzer
STEP 4. Configure the Analyzer
To Attach Cabinet Flanges without Front Handles to the Analyzer
(Option 1CM)
1. Ensure that the cabinet flange kit is
complete.
2. Remove side trim strips.
• (2) cabinet mount flanges
• (6) screws
3. Attach the cabinet flanges to the sides of
the front panel using three screws for each
flange.
4. Remove the feet and the tilt stands before
cabinet mounting the instrument.

Agilent Technologies 8753ES Specifications

General

Brand	Agilent Technologies
Model	8753ES
Category	Measuring Instruments
Language	English