Agilent Technologies E3634A Operating Manual

122
Application Programs
This chapter contains two application programs over the remote interface to
help you develop programs for your own application. Chapter 4, “Remote
Interface R eference,” startin g on
page 61, lists the syntax for the SCPI
(Standard Commands for Programmable Instruments) commands available to
program the power supply.
The examples in t his chapter have been tested on a PC running Windows
®
3.1,
Windows
®
95 or Windows
®
NT 4.0. The examples are written for use over
GPIB (IEEE 488) or RS-232. But the examples for use over the RS-232 interface
do not work with Windows 3.1. These examples require a VISA (Virtual
Instrument Software A rchitecture) driver for use with your GPIB interface
card in your PC. You should have the “ visa.dll ” for Windows
®
3.1 or
“ visa32.dll ” for Windows
®
95 or Windows
®
NT 4.0 in your c:\windows\system
directory to have the examples in this chapter run properly . The examples step
through voltages and make corresponding current readings to characterize a
power diode.

Agilent Technologies E3634A Specifications

General

Brand	Agilent Technologies
Model	E3634A
Category	Power Supply
Language	English