To Next PageTo Next Page
Need help?Do you have a question about the Agilent Technologies E3633A and is the answer not in the manual?
General| Output Current Range | 0 to 3 A |
|---|---|
| Operating Temperature Range | 0 to 50 °C |
| Storage Temperature Range | -40 to 70 °C |
| Ripple and Noise (Vp-p) | Voltage: <2 mV |
| Current Ripple and Noise (20 Hz to 20 MHz) | <500 μA |
| Voltage Programming Accuracy | 0.05% + 10 mV |
| Current Programming Accuracy | 0.1% + 5 mA |
| Ripple and Noise (rms) | ≤ 350 µV |
Essential safety guidelines and compliance requirements for instrument operation.
Steps to verify supplied items, voltage setting, and fuse installation.
Verifies instrument self-test, display, and basic annunciator status upon power-up.
Procedures to check voltage and current output functions with no load.
Step-by-step guide to setting up and operating the power supply in CV mode.
Step-by-step guide to setting up and operating the power supply in CC mode.
Instructions for setting OVP trip levels, checking operation, and clearing conditions.
Instructions for setting OCP trip levels, checking operation, and clearing conditions.
A comprehensive list of SCPI commands for programming the power supply remotely.
