Chapter 4 Remote Interface Reference
Simplified Programming Overview
70
Power Supply Programming Ranges
The SOURce subsystem requires parameters for programming values. The available
programming value for a parameter varies according to the desired output range of
the power supply. The following table lists the programming values available and
MINimum, MAXimum, DEFault and reset values of the Agilent E3633A and
E3634A power supplies.
Refer to this table to identify programming values when programming the power
supply.
Table 4-1. Agilent E3633A Programming Ranges
Table 4-2. Agilent E3634A Programming Ranges
0 - 8V/20A Range 0 - 20V/10A Range
Voltage Programming Range 0 V to 8.24V 0 V to 20.60 V
MAX Value 8.24 V 20.60 V
MIN Value 0 V 0 V
DEFault Value 0 V 0 V
*RST Value 0 V
Current Programming Range 0 A to 20.60 A 0 A to 10.30 A
MAX Value 20.60 A 10.30 A
MIN Value 0 A 0 A
DEFault Value 20 A 10 A
*RST Value 20.00 A
0 - 25V/7A Range 0 - 50V/4A Range
Voltage Programming Range 0 V to 25.75V 0 V to 51.5 V
MAX Value 25.75 V 51.5 V
MIN Value 0 V 0 V
DEFault Value 0 V 0 V
*RST Value 0 V
Current Programming Range 0 A to 7.21 A 0 A to 4.12 A
MAX Value 7.21 A 4.12 A
MIN Value 0 A 0 A
DEFault Value 7.0 A 4.0 A
*RST Value 7.00 A
To Next Page
Loading...
Need help?
General
