Chapter 5 Error Messages
Self-Test Errors
118
Self-Test Errors
The following errors indicate failures that may occur during a self-test. Refer to the
Service Guide for more information.
601 Front panel does not respond
602 RAM read/write failed
603 A/D sync stuck
604 A/D slope convergence failed
605 Cannot calibrate rundown gain
606 Rundown gain out of range
607 Rundown too noisy
608 Serial configuration readback failed
624 Unable to sense line frequency
625 I/O processor does not respond
626 I/O processor failed self-test
630 Fan test failed
631 System DAC test failed
632 Hardware test failed
To Next Page
Loading...
