Chapter 4
Front-Panel Key and SCPI Command Reference
Measurement keys
229
Front-Panel Key and SCPI Command
Reference
4.4.6.2.2.4 Scale Coupling
Allows you to toggle the scale coupling function between On and Off.
4.4.6.3 Trace / View
Allows you to select the desired measurement view from the following selections:
• Numeric Results
• Demod Waveform
Example: :DISP:PMD:WIND:TRAC:Y:RPOS TOP
:DISP:PMD:WIND:TRAC:Y:RPOS?
Key Path:
Amplitude Y Scale
Remote Command: :DISPlay:PMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:COUPle
0|1|OFF|ON
:DISPlay:PMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:COUPle?
Preset: OFF
State Saved: Saved in instrument state.
Range: On|Off
Dependencies/
Couplings:
See Restriction and Notes
Notes: Upon pressing the Restart front-panel key or Restart softkey under the Meas Control menu,
the scale coupling function automatically determines the scale per division and reference
values based on the measurement results if this parameter is set to On. When you set a value to
either Scale/Div or Ref Value manually, Scale Coupling automatically changes to Off.
Example: :DISP:PMD:WIND:TRAC:Y:COUP OFF
:DISP:PMD:WIND:TRAC:Y:COUP?
Mode: MRECEIVE
Key Path:
View/Display
Preset: NUMeric
State Saved: Saved in instrument state.
Range: Numeric results | Waveform result
To Next Page
Loading...
Need help?
General
