Agilent Technologies E5515C Manual Operation

52 Chapter 2
cdma2000/IS-2000 Mobile Test Application
How Do I Configure the Test Set for My Test System?
B. Set amplitude offsets.
1. On the Configuration Summary screen (not shown), press the RF IN/OUT Amptd Offset
(
F5) key.
2. On the RF IN/OUT Amplitude Offset screen, press the RF IN/OUT Amptd Offset Setup
(
F2) key.
3. Enter the amplitude offset for the test frequencies you use.
4. Press the Close Menu (
F6) key.
2
4
深圳德标仪器 135-1095-0799

Agilent Technologies E5515C Specifications

General

Brand	Agilent Technologies
Model	E5515C
Category	Test Equipment
Language	English