To Next Page

To Previous Page

64 Chapter 3

GPRS Mobile Test Application

How Do I Perform a Handover?

1. Press the CALL SETUP key.

2. Press the Handover Setup (

F5) key.

3. Change the various parameters, for example Traffic Band.

4. Press the Handover Execute (

F5) key to complete the handover, or press the Close

Menu (

F6) key to abort the handover.

5. Check for Transferring in the Active Cell: field.

6. Press the

More key to check that the changes have been implemented on the Call Parms

menus (2 of 3) and (3 of 3).

深圳德标仪器 135-1095-0799

Table of Contents15
AMPS/136 Mobile Test Application19
How Do I Make Measurements on a Mobile20
Establish a Call20
Select Measurements21
How Do I Change Measurement Setup22
Select a Measurement22
Set up the Measurement23
How Do I Turn off a Measurement24
How Do I Change Call Parameters25
How Do I Change the MS TX Level26
Change the Digital MS TX Level Immediately26
Change the MS TX Level During a Handoff27
How Do I Perform a Handoff28
How Do I Configure the Test Set for My Test System29
Configure Instrument Information and Setup29
Set Amplitude Offsets30
Check the Message Log31
How Do I End a Call32
Cdma2000/Is-2000 Mobile Test Application33
How Do I Make Measurements on a Mobile34
Establish a Call34
Select Measurements35
How Do I View a Graphical Measurement36
How Do I Change the Measurement Setup37
Select a Measurement37
Set up the Measurement38
How Do I Turn off a Measurement39
How Do I Set up a Call40
How Do I Change Call Parameters42
How Do I Change Cell Information43
Set Cell Parameters43
Select the Cell Parameters Menu43
Set a Cell Parameter44
Set Access Parameters45
Select the Access Parameters Menu45
Set an Access Parameter46
Set Registration Parameters47
Select the Registration Parameters Menu47
Set a Registration Parameter48
How Do I Change Code Channel Levels49
How Do I Perform a Handoff50
How Do I Configure the Test Set for My Test System51
Configure Instrument Information and Setup51
Set Amplitude Offsets52
Check Message Log53
How Do I End a Call54
GPRS Mobile Test Application55
How Do I Make Measurements on a Mobile56
Establish a Data Connection56
Select Measurements57
How Do I Change Measurement Setup58
Select a Measurement58
Set up the Measurement59
How Do I Turn off a Measurement60
How Do I Change Call Parameters61
How Do I Change Cell Parameters62
Select the Cell Parameters Menu62
Set a Cell Parameter63
How Do I Perform a Handover64
How Do I Change the MS TX Level65
Change the MS TX Level Immediately65
Change the MS TX Level During a Handover66
How Do I Configure the Test Set for My Test System67
Configure Instrument Information and Setup67
Set Amplitude Offsets68
Check the Message Log69
How Do I End the Data Connection70
GSM Mobile Test Application71
How Do I Make Measurements on a Mobile72
Establish a Call72
Select Measurements73
How Do I Change a Measurement's Setup74
Select a Measurement74
Set up the Measurement75
How Do I Turn off a Measurement76
How Do I Change Cell Parameters77
Select the Cell Parameters Menu77
Set a Cell Parameter78
How Do I Change Call Parameters79
How Do I Configure the Test Set for My Test System80
Configure Instrument Information and Setup80
Set Amplitude Offsets81
Check the Message Log82
How Do I End a Call83
GSM_AMPS/136 Fast Switch85
How Do I Switch Formats86
Choose a Format86
Switch Formats87
Switching Test Applications89
How Do Switch Test Applications90
Choose a Test Application90
Switch Test Applications91

Brand	Agilent Technologies
Model	E5515C
Category	Test Equipment
Language	English

Agilent Technologies E5515C Manual Operation

Table of Contents

Other manuals for Agilent Technologies E5515C

Questions and Answers:

Agilent Technologies E5515C Specifications

Related product manuals