User’s Guide 31
E8362/3/4C Option H85
Safety and Regulatory Information
Safety and Regulatory Information
Introduction
Review this product and related documentation to familiarize yourself with safety
markings and instructions before you operate the instrument. The documentation contains
information and warnings that must be followed by the user to ensure safe operation and
to maintain the product in a safe condition.
Cleaning the Instrument
WARNING To prevent electrical shock, disconnect the instrument from mains
before cleaning. Use a dry cloth or one slightly dampened with water
to clean the external case parts. Do not attempt to clean internally.
Connector Care and Cleaning
Cleaning connectors with alcohol shall only be done with the instrument power cord
removed, and in a well ventilated area. Allow all residue alcohol moisture to evaporate and
the fumes to dissipate prior to energizing the instrument.
WARNING Keep isopropyl alcohol away from heat, sparks, and flame. Store in a
tightly closed container. It is extremely flammable. In case of fire, use
alcohol foam, dry chemical, or carbon dioxide; water may be
ineffective.
Use isopropyl alcohol with adequate ventilation and avoid contact with eyes,
skin, and clothing. It causes skin irritation, may cause eye damage, and is
harmful if swallowed or inhaled. It may be harmful if absorbed through the skin.
Wash thoroughly after handling.
In case of spill, soak up the sand or earth. Flush spill area with water. Dispose of
isopropyl alcohol in accordance with all applicable federal, state, and local
environmental regulations.
Declaration of Conformity
For a copy of the manufacturer’s Declaration of Conformity for this apparatus, contact your
local Agilent Technologies office or sales representative. Refer to “Contacting Agilent” on
page 37.
Statement of Compliance
This instrument has been designed and tested in accordance with IEC Publication 1010,
Safety Requirements for Electronic Measuring Apparatus, and has been supplied in a safe
condition. The instruction documentation contains information and warnings which must
be followed by the user to ensure safe operation and to maintain the instrument in a safe
condition.
To Next Page
Loading...
