To Next Page

To Previous Page

18 Chapter 1

Installation and Setup

Printer Setup and Operation

A printer can be connected to your analyzer if it is equipped with an external I/O interface. Supported

printers accept Hewlett-Packard Printer Control Language Level 3 (PCL3) or 5 (PCL5). Refer to the

documentation or specifications supplied with your printer, or contact the manufacturer to identify

your printer’s language.

Equipment

• IEEE 1284 compliant printer cable.

• Supported and tested printers are listed below. Note that there are many PCL3/5 printers that may

work with your analyzer, however, they have not been tested.

— PCL3 printers include most HP DeskJet printers.

— PCL5 printers include most HP LaserJet printers.

NOTE The following printers are not compatible with your analyzer: 

HP Deskjet 720C, 722C, 820C and 1600C 

Epson MX-80, FX-85, Stylus, and LQ-570

Printer Models Language Type Color Capable

HP DeskJet 310, 320, 350C, 400L PCL3 yes

HP DeskJet 500C, 550C, 600, 660C, 672C, 680C,

682C, 690C, 693C

PCL3 yes

HP DeskJet 840C, 850C, 870C, 890C, 895C PCL3 yes

HP DeskJet 935C, 970C, 990C PCL3 yes

HP DeskJet 1120C, 1150C PCL3 yes

HP Inkjet 2000C PCL 3 yes

HP LaserJet III PCL3/5 no

HP LaserJet 4P PCL3/5 no

HP LaserJet 5L, 5M, 5N, 5P, 5SI PCL3/5 no

HP LaserJet 6L, 6MP PCL5 no

HP LaserJet 2100 Series, PCL3/5 no

HP LaserJet 4050N PCL3/5 yes

HP LaserJet 5000GN PCL3/5 yes

HP Professional Series 2500CM PCL3 yes

Agilent Technologies ESA-E E4407B Getting Started Guide

Other manuals for Agilent Technologies ESA-E E4407B