86 Chapter 5
Options and Accessories
Accessories
operates over a frequency range of 9 kHz to 200 MHz, with 10 dB of insertion loss.
RF Bridges
The Agilent 86205A 50 RF bridge and 86207A 75 RF bridge can be used to make reflection
measurements using an analyzer with tracking generator Option 1DN or 1DQ or with an external signal
generator. These external directional bridges offer high directivity and excellent port match. The 86205A
operates over a frequency range of 300 kHz to 6 GHz. The 86207A operates over a frequency range of
300 kHz to 3 GHz.
RS-232 Cable
For use with Option 1AX. The 24542GC is a 3 meter 9-pin (f) to 25-pin (m) RS-232 cable. The Agilent
24542U is a 3 meter 9-pin (f) to 9-pin (f) RS-232 cable for serial 9-pin PC connection to an analyzer. The
modem cable required is Agilent 24542M 9-pin (f) to 25-pin (m), and the PC cable is Agilent 24542U.
The Agilent 5182-4794 is a 2.5 meter 9-pin (f) to 9-pin (f) RS-232 cable for serial 9-pin PC connection
to an analyzer (included with Option 1AX).
Static Safe Accessories
9300-0797 3M static control mat 0.6 m 1.2 m (2 ft. 4 ft.) with a 4.6 cm (15 ft.) ground wire.
Does not include wrist strap or cord
9300-1367 Wrist-strap, color black, stainless steel. Four adjustable links and a 7 mm post-type
connection.
9300-0980 Wrist-strap cord 1.5 m (5 ft.)
9300-1308 ESD heel-strap (reusable 6 to 12 months)
To Next Page
Loading...
Need help?
General
