Agilent Technologies InfinityLab LC Series - Multicolumn Thermostat G7116 A

12 1260 Infinity II Binary LC System - Manual and Quick Guide
1 Introduction
System Components
Multicolumn Thermostat G7116A
The Agilent 1260 Infinity II Multicolumn Thermostat (MCT) allows precise
column thermostatting over a broad temperature range: from cooling down to
10 degrees below ambient temperature up to 85 °C, providing high flexibility
for optimized speed and selectivity of LC separation.
Ultrahigh pressure valves enable a wide range of applications such as column
selection from 4 columns in a single MCT, sample preparation for analyte
enrichment or matrix removal, alternating column regeneration, etc.
For bio-inert applications bio-inert heat exchangers and a selection of
bio-inert valves are offered.
The MCT fits with all 1260 Infinity II modules and can also be combined with
modules of the Agilent 1260 and 1290 Infinity II Series.
Figure 4 Overview of the Multicolumn Thermostat
6WDWXVLQGLFDWRU
9DOYH
3RZHUVZLWFK
/HDNGUDLQ