EasyManua.ls Logo

Agilent Technologies N5183A - User Manual

Agilent Technologies N5183A
366 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Programming Guide
(With Remote Operation and File Downloads)
Agilent Technologies
Signal Generators
This guide applies to the following signal generator models:
Due to our continuing efforts to improve our products through firmware and hardware revisions, signal generator design
and operation may vary from descriptions in this guide. We recommend that you use the latest revision of this guide to
ensure you have up-to-date product information. Compare the print date of this guide (see bottom of page) with the latest
revision, which can be downloaded from the following websites:
N5181A/82A MXG RF Signal Generators N5183A MXG Microwave Analog Signal Generator
E4428C/38C ESG RF Signal Generators E8663B RF Analog Signal Generator
E8257D/67D PSG Microwave Signal Generators
http://www.agilent.com/find/mxg http://www.agilent.com/find/esg
http://www.agilent.com/find/psg http://www.agilent.com/find/e8663b
Manufacturing Part Number: E8251- 90355
Printed in USA
February 2008
© Copyright 2006- 2008 Agilent Technologies, Inc.

Table of Contents

Questions and Answers

  • S
    strevinoAug 9, 2025
    What to do if I get ERROR 628, DAC over range on my Agilent Technologies Inverter?
    • W
      Wayne TorresAug 9, 2025
      The 'ERROR 628, DAC over range' on your Agilent Technologies Inverter can occur due to a couple of reasons. One reason is that the signal's amplitude is exceeding the DAC input range, in which case you should scale or reduce the DAC input values. Another reason, specifically on the Agilent MXG, is downloading an encrypted file (.SECUREWAVE) from a PC or USB with an incorrect suffix. If this is the case, use the Use as or Copy File to Instrument softkey menus to correctly download the encrypted file to the instrument.
  • C
    Clarence RhodesAug 16, 2025
    How to fix ERROR -321, Out of memory on Agilent Technologies Inverter?
    • M
      Monica CabreraAug 17, 2025
      If you're encountering 'ERROR -321, Out of memory' on your Agilent Technologies Inverter, it means there isn't enough space in the ARB memory for the waveform file you're trying to download. To resolve this, either reduce the file size of the waveform file or delete unnecessary files from the ARB memory.
  • L
    Lauren PerezAug 25, 2025
    Why is there no RF output from my Agilent Technologies Inverter?
    • C
      Charles AlexanderAug 25, 2025
      If your Agilent Technologies Inverter has no RF output, the marker RF blanking function might be active. Check and turn RF blanking off to restore the output.
  • A
    Amy SanchezAug 31, 2025
    What to do if I receive ERROR 224, Text file busy on my Agilent Technologies Inverter?
    • J
      Jamie YoungAug 31, 2025
      The 'ERROR 224, Text file busy' on your Agilent Technologies Inverter happens when you try to download a waveform with the same name as one currently playing on the signal generator. You can either change the name of the waveform you're downloading or turn off the ARB to fix this.

Summary

Using IO Interfaces

Using LAN

Explains LAN interface setup, protocols, and configuration for remote control.

Using RS-232 (ESG, PSG, and E8663 B Only)

Using USB (Agilent MXG)

Programming Examples

Using GPIB

Covers GPIB interface setup, examples, and function statements.

LAN Programming Interface Examples

Provides examples for VXI-11, Sockets LAN, and related protocols.

RS-232 Programming Interface Examples (ESG;PSG;E8663 B Only)

Programming the Status Register System

Overview

Status Register Bit Values

Accessing Status Register Information

Details methods for monitoring conditions and accessing status information.

Status Byte Group

Creating and Downloading Waveform Files

Code Algorithm

Downloading Waveform Data

Details methods for downloading I/Q waveform data from simulation and programming environments.

Loading, Playing, and Verifying a Downloaded Waveform

Provides procedures for loading, playing, and verifying downloaded waveforms.

Downloading E443 xB Signal Generator Files

Creating and Downloading User-Data Files

Pattern RAM (PRAM) Data Downloads (E4438 C and E8267 D)

Explains how to download PRAM data for real-time Custom and TDMA modulation.

FIR Filter Coefficient Downloads (N5182 A, E4438 C and E8267 D)

Covers downloading FIR filter coefficients for specific models and options.

Save and Recall Instrument State Files

Describes saving and recalling instrument state settings using SCPI commands.

User Flatness Correction Downloads Using C++ and VISA

Details downloading user flatness correction values using C++ and VISA.

Data Transfer Troubleshooting (N5182 A, E4438 C and E8267 D Only)

Provides troubleshooting steps for data transfer issues on specific models.

Agilent Technologies N5183A Specifications

General IconGeneral
Amplitude Accuracy±0.5 dB
I/Q ModulationYes
Modulation TypesAM, FM, PM, Pulse, FSK, PSK
Output Impedance50 ohm
Harmonics-30 dBc
Switching Speed (frequency)≤ 900 μs
Power Requirements100 to 240 VAC, 50/60 Hz
Subharmonics-60 dBc

Related product manuals