Agilent Technologies N5183A User Manual

Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide 209
Creating and Downloading Waveform Files
Commands for Downloading and Extracting Waveform Data
Table 5-11 Downloading Encrypted Files for Extraction
Download
Method/Memory
Type
Command Syntax Options
SCPI/volatile
a
memory
MEM:DATA:UNPRotected "/user/bbg1/securewave/file_name",<blockdata>
MEM:DATA:UNPRotected "SWFM1:file_name",<blockdata>
MEM:DATA:UNPRotected "file_name@SWFM1",<blockdata>
SCPI/non- volatile
memory
a
MEM:DATA:UNPRotected "/user/securewave/file_name",<blockdata>
MEM:DATA:UNPRotected "SNVWFM:file_name",<blockdata>
MEM:DATA:UNPRotected "file_name@SNVWFM",<blockdata>
FTP/volatile
memory
b
put <file_name> /user/bbg1/securewave/<file_name>
FTP/non- volatile
memory
b
put <file_name> /user/securewave/<file_name>
a.On the N5182A the :MEM:DATA:UNPRotected command is not required to be able to extract files (i.e. use :MEM:DATA). For more
information, refer to the SCPI Command Reference.
b. See “FTP Procedures” on page 210.
Table 5-12 Extracting Encrypted Waveform Data
Download
Method/Memory
Type
Command Syntax Options
SCPI/volatile
memory
MMEM:DATA? "/user/bbg1/securewave/file_name"
MMEM:DATA? "SWFM1:file_name"
MMEM:DATA? "file_name@SWFM1"
SCPI/non- volatile
memory
MMEM:DATA? "/user/securewave/file_name"
MMEM:DATA? "SNVWFM:file_name"
MMEM:DATA? "file_name@SNVWFM"
FTP/volatile
memory
a
get /user/bbg1/securewave/<file_name>
FTP/non- volatile
memory
a
get /user/securewave/<file_name>
a. See “FTP Procedures” on page 210.

Agilent Technologies N5183A Specifications

General

Brand	Agilent Technologies
Model	N5183A
Category	Portable Generator
Language	English