Sealing microplates
14 G5585B PlateLocThermal Microplate Sealer Quick Guide
The touchscreen automatically returns to the Home page. Status messages
appear at the top of the Home page, such as, Warming up, Cooling down, or Ready.
You can also monitor the following:
• Seal Time displays the time remaining in the seal cycle.
• Seal Temp displays the current temperature. The text turns blue when the hot
plate temperature is within Set Temp run temperature range.
Note: The touchscreen readout displays the temperature as measured on
the opposite side of the hot plate sealing surface. The actual temperature
of the sealing surface may vary slightly.
To Next Page
Loading...
Need help?
General
