About this guide
2 G5585B PlateLocThermal Microplate Sealer Quick Guide
About this guide
This guide summarizes the operator instructions in the PlateLoc Thermal Microplate
Sealer User Guide.
This guide assumes that the PlateLoc Sealer is installed correctly. For installation
details, see the PlateLoc Thermal Microplate Sealer User Guide.
Firmware version
This guide documents PlateLoc firmware version 6.2.0.
Where to find the user documentation
You can access the user guides for Agilent Automation Solutions products in the
following ways:
• Visit the online VWorks Knowledge Base at www.agilent.com/chem/askb.
If you are using the VWorks software, select Help > Knowledge Base or press F1 to
open the locally installed help system. Or, select Start > Agilent Technologies >
VWorks Knowledge Base from the Windows desktop.
• Download a pdf from www.agilent.com.
Contacting Agilent Technologies
Web: https://www.agilent.com
Contact page: https://www.agilent.com/en/contact-us/page
Documentation feedback: documentation.automation@agilent.com
Safety information
Before using the PlateLoc Sealer
Make sure that you are properly trained in:
• General laboratory safety
• The correct and safe operation of the PlateLoc Sealer
• The correct and safe operation of lab automation systems or components used in
combination with the PlateLoc Sealer
If you are the person in your organization responsible for training others on the
PlateLoc Sealer and you have a safety question, contact Technical Support.
Safety standards
The PlateLoc Sealer complies with the applicable EU Directives and bears the CE mark.
See the Declaration of Conformity for compliance details.
To Next Page
Loading...
Need help?
General
