Touchscreen menus and commands
24 G5585B PlateLocThermal Microplate Sealer Quick Guide
Settings 3/5
Indicator Description
Cycle Mode (200) Turns on or off the Cycle Mode. When set to On, the Cycle
Mode places 200 seals on the current microplate.
Note: This feature is typically used only by Agilent factory
and service personnel.
Press or to turn On or Off this feature.
View Vacuum Readings Turns on or off the display of the vacuum pressure
readings on the Home page.
Press or to turn On or Off this feature.
To Next Page
Loading...
