23
Touchscreen menus and commands
G5585B PlateLocThermal Microplate Sealer Quick Guide
Settings 2/5
Firmware version Displays the version of the installed firmware for the
device.
Control or indicator Description
Control or indicator Description
Screen Brightness Sets the brightness of the touchscreen display. As you
reduce the brightness, the text in the touchscreen dims.
To adjust the brightness, press or .
Sleep Mode Turns on or off the Sleep Mode. When Sleep Mode is on,
sets the time (minutes) to wait after a seal cycle
completes before cooling down the device when not in
use. During Sleep Mode, the device heaters and the
touchscreen are off.
Press or to select one of the following:
• 20 minutes
• 60 minutes
• 300 minutes
• Off. Turns off the Sleep Mode.
To Next Page
Loading...
