Touchscreen menus and commands
26 G5585B PlateLocThermal Microplate Sealer Quick Guide
Settings 5/5 Seal Clearing Mode
Control or indicator Description
Start Sets the PlateLoc temperature setpoint to 19 °C and cools
the device until the temperature is 45 °C or less.
Clear Seal Available only if the PlateLoc temperature is 45 °C or less.
Press the button to perform the seal clearing operation.
Repeat the Clear Seal operation as necessary to clear the
seal.
Exit Reinstates the original temperature setpoint and displays
the "Start" button again.
To Next Page
Loading...
