EasyManua.ls Logo

AGM Global Vision ASP - ASP Monocular Safety Summary

AGM Global Vision ASP
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 AGM Global Vision
SAFETY SUMMARY
Read and follow all instructions
Read all warnings
Only use the attachments/accessories specified by the manufacturer
All service must be provided by the manufacturer
WARNING:
This product contains natural rubber latex, which may cause allergic reactions! The FDA has
reported an increase in the number of deaths associated with sensitivity to natural latex proteins.
If you are allergic to latex, learn which products contain it and strictly avoid exposure to those
products.
CAUTION:
Do not dismantle the equipment.
Keep the equipment clean. Protect it from moisture, dramatic temperature drops, and
electrical shocks.
DO NOT force the equipment controls past their stopping points.
DO NOT leave the equipment activated during breaks in operation.
DO NOT store the equipment with the batteries installed.
Thoroughly clean and dry each item before placing them into the storage case.
CAUTION:
To prevent thermal damage to the equipment, never point it, either on or off, directly at the sun
or any other source of high intensity light that the unprotected human eye cannot tolerate (such
as a welding arc). To prevent inadvertent exposure to these types of sources, never leave the
equipment with the objective lens cap off.
NOTES:
To avoid losing unsaved data, DO NOT remove the batteries or disconnect the external power
source while the Asp is on.
Inadvertent sun damage is not considered a defect in material or workmanship, and is therefore
not covered in the product warranty.

Related product manuals