AGM ASP-MICRO - Hot Spot Mark; Hot Spot Marking Feature; Digital Zoom; Digital Zoom Operation

AGM Global Vision14
2.2.6 HOT SPOT MARK
The device can detect the highest temperature spot in the scene and mark it
on display.
In the menu, select
/ and press button to enable/disable hot spot
mark (marking the spot of highest temperature).
When the hot spot mark is enabled, the
mark displays in the spot of the
highest temperature. When the scene changes, the mark moves.
2.2.7 DIGITAL ZOOM
Press button in the view mode, the live view will switch between 1×, 2×,
and 4× digital zoom.
2.2.8 FLAT FIELD CORRECTION
Flat Field Correction (FFC) function can correct nonuniformity of display.
1. Hold
button to show the menu of monocular.
2. Select
menu item and press button to switch the FFC mode.
Manual: Hold
button in live view to correct the nonuniformity of display.
Auto: The monocular performs FFC automatically when switching on or
rebooting the camera.
External: Cover the lens cover, then hold
button in live view to correct
the nonuniformity of display.
3. Hold
button to confirm.
2.2.9 DEFECTIVE PIXELS CORRECTION
Defective Pixels Correction (DPC) function can correct the defective pixels on
the screen which are not performed as expected.
Before you start switch the palettes mode to white hot mode.
1. Hold
button to show the menu of monocular.
2. Select
menu item.
3. Press
button to select the offset. The offset refers to the moving length
of cursor.
4. Press
and to select the moving direction.
5. Press
to move the cursor to the position of dead pixel.
6. Hold
to correct the dead pixel.
2.2.10 DISTANCE MEASUREMENT
The device can detect the distance between the target and the observation
position.
NOTE:
When measuring the distance, keep the hand and the position steady.
Otherwise, the accuracy may be affected.