EasyManua.ls Logo

Agria 1000 - Machine Components and Operation; Engine and Core Systems

Agria 1000
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 Power Hoe 1000
3. Machine and Operating Elements
C
3
The power hoe agria type 1000 is suited
for all usual applications in horticulture,
in agriculture and forestry as well as in
park maintenance.
Engine
The four-stroke petrol engine is operated
with commercial petrol (see fuel recom-
mendation on page 6). During the first
20 operating hours (break-in period), the
motor should not be operated at load
limit. Even after the break-in period,
you should make it a principle to never
push the accelerator more than is just
necessary for the actual work.
I
High engine speed is harm-
ful to any engine and con-
siderably affects its durability. This
applies especially for no load opera-
tion. Any overspeed (have the engine
roar) can result in immediate damage.
Cooling System
The engine is fan-cooled. Therefore
keep screen at recoil starter and cool-
ing fins of cylinder clean and free from
sucked-in plant trash.
Idling-speed
Always ensure that idling-speed is ad-
justed correcty. At low speeds and with
the speed control lever set to idle, the
engine is supposed to run smoothly and
without run-out.
Air Filter
The air filter purifies the air intake. A
clogged filter reduces engine output.
Ignition System
The engine is equipped with a mainte-
nance-free, contactless electronic igni-
tion system. We recommend to have
necessary check-ups done by an expert
only.
Speed Control Lever
The speed control lever (A/4) on the
steering handle serves to control engine
speed, to set the CHOKE and to stop
the engine. For positions see fig. C
I
The speed control lever also
serves as an emergency shut-
off. In an emergency, move the lever to
position “STOP” to shut off the engine
fast.